LEMON Manuals: Even more car manuals for everyone

Signal Circuit Inspection

  1. Check short to ground in harness
    1. IG "OFF" and disconnect TPS connector and PCM connector.
    2. Measure resistance between terminal 7 of TPS harness connector and chassis ground.
    3. Measure resistance between terminals 7 and 5(8) of TPS harness connector.

      Specification:  Infinite

      Fig 1: Measuring Resistance Between Terminal 7 Of TPS Harness Connector And Chassis Ground
      G06804456Courtesy of HYUNDAI MOTOR CO.
      Fig 2: Measuring Resistance Between Terminals 7 And 5(8) Of TPS Harness Connector
      G06804457Courtesy of HYUNDAI MOTOR CO.
    4. Is the measured resistance within specification?

      YES 

      NO