LEMON Manuals: Even more car manuals for everyone

Check Open In Harness

  1. IG Key "OFF".
  2. Disconnect the P/S pressure sensor connector.
  3. IG Key "ON".
  4. Measure the voltage between power terminal of P/S pressure sensor harness connector and chassis ground. (Measurement "A")
  5. Measure the voltage between power and ground terminals of P/S pressure sensor harness connector. (Measurement "B")

    Specification : The Difference between "A" and "B" is below 200mV.

  6. Is the measured voltage within specification ?

    YES: 

    NO: