LEMON Manuals: Even more car manuals for everyone

Check Open In Harness

  1. IG "OFF" & ENG "OFF"
  2. Disconnect OTS connector and IG "ON"
  3. Measure voltage between signal terminal of OTS harness connector and chassis ground. (Measurement "A")
  4. Measure voltage between signal and ground terminals of OTS harness connector. (Measurement "B")

    Specification : Measurement "A" - Measurement 'B' = Approx. below 200mV

  5. Is the measured voltage within specification ?

    YES: 

    NO: