LEMON Manuals: Even more car manuals for everyone

Check The Power Source Circuit

  1. Disconnect the connector from the ABS control module.
  2. Turn the ignition switch ON, measure the voltage between terminal 4 of the ABS control module harness side connector and body ground.

    Specification: approximately B+

    Is the voltage within specification?

    YES  : --> Check the ground circuit.

    NO  : --> Check the harness or connector between the fuse (10A) in the engine compartment junction block and the ABS control module. Repair if necessary.

    Fig 1: Checking Power Source Circuit
    G04802617Courtesy of HYUNDAI MOTOR CO.