LEMON Manuals: Even more car manuals for everyone

Front Washer Motor: Inspection: Notes

WARNING: This page is about a different car, the 2008 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
    NOTE: Before installing the pump motor, check the filter for foreign material or contamination. If necessary, clean the filter before putting into pump motor.
  2. Connect positive (+) and negative (-) battery cables to terminals 2 and 1 respectively to see that the washer motor runs and water sprays from the front nozzles.
  3. Check that the motor operates normally.
    Fig 1: Identifying Washer Motor Connector Terminals
    G03764600Courtesy of HYUNDAI MOTOR CO.