LEMON Manuals: Even more car manuals for everyone

Signal Circuit Inspection

  1. Check for open in signal circuit.
    1. Measure resistance between terminals 1 of the ECT sensor harness connector and 24 of the ECM harness connector

      Specification: Approx. 0Ω

    2. Is resistance within the specification?

      YES: 

      • Go to step  2.

      NO: 

  2. Check for short to battery in signal circuit.
    1. Ignition "ON" & Engine "OFF"
    2. Measure voltage between terminals 1 of the ECT sensor harness connector and 24 of the ECM harness connector

      Specification: Approx. 0V

    3. Is voltage within the specification?

      YES: 

      NO: