DTC P0717 Input Speed Sensor Circuit-No Signal: Specification
Input shaft & Output shaft speed sensor
- Type: Hall sensor
- Current consumption: 22mA (MAX)
- Sensor body and sensor connector have been unified as one.
SHAFT SPEED SENSOR SPECIFICATION
| Air gap (mm) | Input shaft speed sensor | 1.3 |
| Output shaft speed sensor | 0.85 | |
| Insulation Resistance | Input shaft speed sensor | over 1MΩ |
| Output shaft speed sensor | over 1MΩ | |
| Peak-Peak Voltage | High | more than 4.8V |
| Low | less than 0.8V |