| DTC Strategy |
|
- Signal circuit is open or short
- Sensor power circuit is open
- Sensor ground circuit is open
- Faulty INPUT SPEED SENSOR
- Faulty PCM
|
| Enable Conditions |
- Engine state=Run
- Vehicle Speed > 30km/h
- Engine RPM at current gear 1 or 2 or Non conditional VRPM when gear is not 1 or 2 > 1000rpm
- Battery voltage > 11V and < 16 V
- AT oil temp. ≥ -23°C(-9.4°F)
- No error in speed sensors
|
| Threshold value |
|
| Diagnostic Time |
|
| Fail Safe |
- The gear shift position is recognized as follows.
- 'P' range → realization as 'N' range
- 'R' range → realization as 'R' range
- 'N' range → realization as 'N' range
- 'D' range → realization as 3 range
- SPT mode → CAN shift 2~3 range
|