LEMON Manuals: Even more car manuals for everyone

DTC P0708 Transaxle Range Switch-High Input: DTC Detecting Condition

DTC DETECTING CONDITION

Item Detecting Condition & Fail Safe Possible cause
DTC Strategy 
  • Check for No signal
  • Open or short in TRANSAXLE RANGE SWITCH
  • Faulty TRANSAXLE RANGE SWITCH
  • Faulty PCM
Enable Conditions 
  • Engine state=Run
  • Battery Voltage > 11V and < 16V
Threshold value
  • Multiple signal
Diagnostic Time 
  • More than 30sec
Fail Safe 
  • If there are no or multiple signals from the transaxle range switch, the PCM will continue to control with the signal which is detected just before DTC occurs.