LEMON Manuals: Even more car manuals for everyone

DTC P0707 Transaxle Range Switch-Low Input: DTC Detecting Condition

DTC DETECTING CONDITION

Item Detecting Condition & Fail Safe Possible cause
DTC Strategy 
  • Check for no signal
  • Open or short in circuit
  • Faulty TRANSAXLE RANGE SWITCH
  • Faulty PCM
Enable Conditions 
  • Engine state=Run
  • PRNDL Diag disabling fault present flag=FALSE
  • Battery Voltage > 11V and < 16 V
  • Throttle position≥ 3%
Threshold value
  • No signal detected
Diagnostic Time
  • More than 30sec
Fail Safe 
  • If there are no or multiple signals from the transaxle range switch, the PCM will continue to control with the signal which is detected just before DTC occurs.