LEMON Manuals: Even more car manuals for everyone

Power Steering Gear Box: Installation

NOTE: Be sure to connect between a tube and a hose as shown in the illustration.
Fig 1: Identifying Tube And Hose Connecting Dimension
G04802354Courtesy of HYUNDAI MOTOR CO.
  1. Installation is reverse of removal.
    TIGHTENING TORQUE REFERENCE CHART

    Items Nm (kgf.m, lb-ft)
    Pressure hose to gear box 12~18 (1.2~1.8,8.6~13)
    Return tube to gear box 12~18 (1.2~1.8,8.6~13)
    Tie rod end lock nut 50~55 (5~5.5, 36.1~39.7)
    Pinion and valve assembly to self locking nut 20~30 (2~3, 14.4~21.6)
    lock nut 50~70 (5~7, 36.1~50.6)
    Tie rod end self locking nut 24~34 (2.4~3.4, 17.3~24.5)
    Mounting bracket to crossmember 60~80 (6~8, 43.3~57.8)
  2. After installation, bleed the air in the power steering system (See AIR BLEEDING ).