LEMON Manuals: Even more car manuals for everyone

Control Circuit Inspection

  1. Check short in coil control
    1. IG "OFF".
    2. Disconnect Main Relay and PCM connector.
    3. Measure resistance between harness terminal 4 and chassis ground.
    4. Measure resistance between harness terminal 4 and 5 of Main Relay.

      Specification : Infinite

    5. Is the measured resistance within specification ?

    YES 

    • Go to  2 "Check open in coil control" as follows.

    NO 

  2. Check open in coil control
    1. IG "OFF".
    2. Disconnect Main Relay and PCM connector.
    3. Measure resistance between harness terminal 4 of Main Relay and harness terminal 43/C 144-1 of PCM harness connector.

      Specification : Approx. below 1Ω

    4. Is the measured resistance within specifications ?

    YES 

    NO