LEMON Manuals: Even more car manuals for everyone

Fuel Pump (FP): Removal

  1. Preparation
    1. Open the Service Cover (A) with unscrewing the bolts (B).
      Fig 1: Identifying Service Cover And Bolts
      G04891162Courtesy of HYUNDAI MOTOR CO.
    2. Disconnect the Fuel Pump Connector (A).
      Fig 2: Disconnecting Fuel Pump Connector
      G04891163Courtesy of HYUNDAI MOTOR CO.
    3. Start the engine and wait until fuel in fuel line is exhausted.
    4. After the engine stalls, turn the ignition switch to OFF position.
  2. Disconnect the Fuel Feed Line (A), Recirculation Line (B) and Fuel Tank Pressure Sensor connector (C).
    Fig 3: Disconnecting Fuel Feed Line, Recirculation Line And Fuel Tank Pressure Sensor Connector
    G04891164Courtesy of HYUNDAI MOTOR CO.
  3. Unfasten the Fuel Pump Locking Ring (D) with the Special Service Tool (Refer to "SPECIAL SERVICE TOOL ").
    CAUTION: Be careful NOT TO damage the surface of the fuel rank.
  4. Remove the Fuel Pump assembly from the Fuel Tank.
Fig 4: Identifying Fuel Pump Assembly Components
G04891165Courtesy of HYUNDAI MOTOR CO.