LEMON Manuals: Even more car manuals for everyone

Front Strut Assembly: Installation

  1. Install the strut assembly and then tighten the strut upper mounting nuts (A).

    Tightening torque Nm (kgf-m, lb-ft): 

    44.1~58.8 (4.5~6.0, 32.5~43.4)

    Fig 1: Locating Strut Upper Mounting Nuts
    G05350112Courtesy of HYUNDAI MOTOR CO.
  2. Install the wheel speed sensor cable (A) and strut lower mounting bolts (B).

    Tightening torque Nm (kgf-m, lb-ft): 

    Bolt (B) : 152.0~171.6 (15.5~17.5, 112.1~126.6)

    Fig 2: Locating Wheel Speed Sensor Cable And Strut Lower Mounting Bolts
    G05350113Courtesy of HYUNDAI MOTOR CO.
  3. Install the front stabilizer link (A) to the strut assembly.

    Tightening torque Nm (kgf-m, lb-ft) : 

    Nut (B) : 98.1 ~ 117.7 (10.0 ~ 12.0, 72.3 ~ 86.8)

    Fig 3: Locating Front Stabilizer Link
    G05350123Courtesy of HYUNDAI MOTOR CO.
  4. Install the wheel and tire (A) to the front hub (B).

    Tightening torque Nm (kgf-m, lb-ft): 

    88.3~107.9 (9~11, 65.1~79.6)

    Fig 4: Locating Wheel And Tire And Front Hub
    G05350110Courtesy of HYUNDAI MOTOR CO.
    CAUTION: Be careful not to damage the hub bolts (C) when installing the front wheel and tire (A).