LEMON Manuals: Even more car manuals for everyone

Control Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect front HO2S harness connector.
  3. Measure voltage between terminal 1 of the HO2S harness connector and chassis ground

    Specification : Approx. 2~3V

  4. Measure resistance between terminals 1 and 1,2,3,5,6 of the HO2S harness connector

    Specification : Infinite

    Fig 1: Measuring Voltage Between Terminal 1 Of HO2S Harness Connector And Chassis Ground
    G05363916
    Fig 2: Measuring Resistance Between Terminals 1 And 1,2,3,5,6 Of HO2S Harness Connector
    G05363917
  5. Is the measured data within specification?

    YES 

    NO