LEMON Manuals: Even more car manuals for everyone

Heater Control Circuit Inspection

  1. Check for short circuit in Heater line
    1. Ignition "OFF"
    2. Disconnect front HO2S harness connector.
    3. Measure resistance between terminals 6 and 1,2,3,4,5 of the HO2S harness connector

      Specification : Infinite

      Fig 1: Measuring Resistance Between Terminals 6 And 1,2,3,4,5 Of HO2S Harness Connector
      G05363901
  2. Check for heater control circuit
    1. Ignition "ON" & Engine "OFF"
    2. Measure voltage between terminal 6 of the HO2S harness connector and chassis ground

      Specification : Approx.4.5V

    Fig 2: Measuring Voltage Between Terminal 6 Of HO2S Harness Connector And Chassis Ground
    G05363902
  3. Check for heater power circuit
    1. Measure voltage between terminal 5 of the HO2S harness connector and chassis ground

      Specification : Battery voltage

    Fig 3: Measuring Voltage Between Terminal 5 Of HO2S Harness Connector And Chassis Ground
    G05363903
  4. Is the measured data within specification?

    YES 

    NO