LEMON Manuals: Even more car manuals for everyone

Signal Circuit Inspection

  1. Ignition "ON" & Engine "OFF"
  2. Install Scantool and monitor the "MASS AIR FLOW (V)" parameter on the Scantool data list.

    Specification : Approx. 0.1V

  3. Is "MASS AIR FLOW (V)" within specification?

    YES 

    • Go to next step as below

    NO 

    • Possibility of wiring harness or component malfunction
      • Below 0.1V : Check for open or short to ground in signal circuit
      • Above 5V : Check for short to battery in signal circuit
    • Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
    • If OK, go to next step as below