LEMON Manuals: Even more car manuals for everyone

Control Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect PCM connector
  3. Measure resistance between terminal 2 of the PCSV harness connector and 26 of the PCM harness connector

    Specification: Approx. 0Ω

  4. Is resistance within the specification?

    YES: 

    • Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO: