LEMON Manuals: Even more car manuals for everyone

Monitor Scantool Data

  1. Engine "ON".
  2. Monitor Engine Coolant Temperature Sensor parameter on Current data.
  3. After the engine has been starting, Check that ECT rises steadily to about 90°C (194°F) and ECT stabilizes when the thermostat opens.

    Specification: ECT rises steadily to about 90°C (194°F) and ECT stabilizes when the thermostat opens. (error range 2~3%.)

    TEMPERATURE AND RESISTANCE REFERENCE CHART

    Temperature (°C/°F) -30 (-22°F) -20 (-32°F) 0 (32°F) 20 (68°F) 40 (104°F) 60 (140°F) 80 (176°F) 100 (212° F) 110 (230° F)
    Resistance (kΩ) 26.74 15.48 5.79 2.45 1.148 0.587 0.322 0.188 0.147
    Voltage (V) 4.39 4.17 3.48 2.46 1.68 1.04 0.63 0.39 0.31
    Fig 1: Screen Display - Engine Coolant Temperature Sensor Data At Normal
    G07375017
    Fig 2: Screen Display - Engine Coolant Temperature Sensor Data At Open
    G07375018
    Fig 3: Screen Display - Engine Coolant Temperature Sensor Data At Short
    G07375019
  4. Is Current data displayed correctly?

    YES

    • Fault is intermittent caused by poor contact in the sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO