LEMON Manuals: Even more car manuals for everyone

Front Strut Assembly: Disassembly

  1. Remove the dust cover with a flat-tip screw driver.
    Fig 1: Removing Insulator Dust Cover
    G00791146Courtesy of HYUNDAI MOTOR CO.
  2. Using the special tool (09546-26000), compress the coil spring until there is only a little tension on the strut.
    NOTE: Do not use an impact gun.
    Fig 2: Compressing Coil Spring
    G00791147Courtesy of HYUNDAI MOTOR CO.
  3. Remove the front strut self-locking nut.
    Fig 3: Removing Strut Self-Locking Nut
    G00791148Courtesy of HYUNDAI MOTOR CO.
  4. Remove the washer, strut insulator assembly, upper spring seat, upper spring pad, bumper rubber, dust cover, coil spring and lower spring pad.