LEMON Manuals: Even more car manuals for everyone

Front Strut Assembly: Inspection

  1. Check the strut insulator bearing for wear or damage.
    Fig 1: Checking Strut Insulator Bearing For Wear Or Damage
    G00336002Courtesy of HYUNDAI MOTOR CO.
  2. Check the rubber parts (Insulator dust cover, Strut insulator, Spring seat assembly, Strut dust cover, Spring lower pad) for damage or deterioration.
  3. Check the coil spring for sagging and weakness.
  4. Reassemble all the parts except for the coil spring.
  5. Repeat pushing and pulling of the damper assembly as shown.
  6. Check for smooth operation through a full stroke.

    If there is no compression, no extension and the gas is leaking, it is strongly recommended that the damper should be replaced.

    Fig 2: Checking Strut For Smooth Operation Through A Full Stroke
    G00336003Courtesy of HYUNDAI MOTOR CO.