LEMON Manuals: Even more car manuals for everyone

Second Brake End Play Adjustment

Replace the pressure plate of the second brake with the special tool, and then install the brake disc and brake plate as shown in the figure. Install the return spring, second brake piston and snap ring.

Fig 1: Identifying Second Brake Piston, Snap Ring & Return Spring
G01153972Courtesy of HYUNDAI MOTOR CO.
  1. Standard value: 0.79 - 1.25mm

Reference Select a pressure plate whose thickness is within the following valve. [A (moving amount) + thickness of the special tool - 1.25] to [A (moving amount) + thickness of the special tool - 0.79]. Refer to SNAP RING FOR ADJUSTMENT & SPACER (A/T) .

Fig 2: Measuring Second Brake End Play
G01153973Courtesy of HYUNDAI MOTOR CO.