LEMON Manuals: Even more car manuals for everyone

Fuel Level Sensor

WARNING: This page is about a different car, the 1996 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel gauge sending unit from fuel tank. Connect a 12-volt, 3.4-watt test light in series between positive battery terminal and sending unit terminal No. 1. SeeFigure .
  2. Using jumper wire, connect sending unit terminal No. 3 to negative battery terminal. Test light should illuminate. Submerge sending unit thermistor (float) in water. Ensure test light goes off. Replace entire fuel gauge sending unit if results are not as specified.