Tire Pressure Monitor Warning Indicators
If the TPMS control unit detects less than 25 psi (175 kPa), it alerts the driver by turning on the low pressure indicator and setting a Diagnostic Trouble Code (DTC) in the control unit. When the tire pressure is increased to more than 29 psi (200 kPa) and the vehicle is driven above 28 mph, the control unit will turn off the indicators and store the DTC(s) after the transmitter has sent the tire pressure signal to it.
If low tire pressure indicator is lit continuously due to low pressure in one or more tires, adjust tire inflation to proper pressure as indicated on the tire and loading information placard. The light will remain on until tire pressure is properly set. If warning light is still lit, or the TPMS indicator is lit continuously, there is a problem in the TPM system. See appropriate manufacturer service information.
The TPMS indicator will come on if the following has occurred:
- If a problem is detected in the system.
- If low tire pressure and a problem in the system is detected.
- If the TPMS control unit loses power or fails.NOTE: No DTCs will be set.