LEMON Manuals: Even more car manuals for everyone

Radiator Cap Test

  1. Remove the radiator cap (A), wet its seal with engine coolant, then install it on the commercially available pressure tester (B).
    Fig 1: Identifying Radiator Cap & Pressure Tester
    G03692506Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Apply a pressure of 93-123 kPa (0.95-1.25 kgf/cm2, 14-18 psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.