DTC 86: F-CAN Communication
- Clear the DTC using the HDS (see HOW TO RETRIEVE DTCS ).
- Start and run the engine for at least 5 seconds then turn the engine off.
- Check for DTCs using the HDS.
Is DTC 86 indicated?
YES - Go to step 4.
NO - Intermittent failure, the F-CAN communication line is OK at this time.
- Check for DTCs in the PCM.
Are any DTCs indicated?
YES - Troubleshoot the PCM DTCs.
NO - Replace the VSA modulator-control unit (see VSA MODULATOR-CONTROL UNIT REMOVAL AND INSTALLATION ).