LEMON Manuals: Even more car manuals for everyone

Brake Fluid Level Switch Test

  1. Remove the reservoir cap (A). Check that the float (B) moves up and down freely; if it doesn't, replace the reservoir cap assembly.
  2. Check for continuity between the terminals with the float in the down position (C) and the up position (D):
    • With the float up, there should be no continuity.
    • With the float down, there should be continuity.
    • Fig 1: Checking Continuity Between Terminals With Float
      G04547369Courtesy of AMERICAN HONDA MOTOR CO., INC.