LEMON Manuals: Even more car manuals for everyone

Total Starting Torque Measurement

  1. 3) Rotate the companion flange several times to seat the tapered roller bearing.
  2. 4. Measure the starting torque (companion flange side) using a torque wrench.
    NOTE: To prevent damage to the transfer housing, always use soft jaws or equivalent materials between the transfer housing and the vise.

    Standard: 

    2.16-3.57 N.m 

    (22.0-36.4 kgf.cm, 19.1-31.6 lbf.in) 

    Fig 1: Measuring Companion Flange Starting Torque
    G03678032Courtesy of AMERICAN HONDA MOTOR CO., INC.