LEMON Manuals: Even more car manuals for everyone

Retrieving Codes

WARNING: This page is about a different car, the 1992 Honda Civic. However, it is still accessible from the selected car via links, so may be relevant.

With ignition off, insert jumper wire in service check connector terminal, located behind right side of dash. See Fig 1 . Turn ignition on and count flashes on CHECK ENGINE light.

SeeTROUBLE CODE IDENTIFICATION  table and proceed to appropriate TROUBLE CODE CHART for testing. All voltage tests should be performed with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless specifically stated differently in testing procedures.

Fig 1: Locating Service Check Connectors (Civic)
G92B25131Courtesy of AMERICAN HONDA MOTOR CO., INC.