Functional Test
NOTE:
If vehicle does not function as specified, go to appropriate symptom test under SYMPTOM TESTS
.
- Turn ignition switch to ON position. Press and hold sun roof switch to SLIDE OPEN position until sun roof motor stops. Sun roof motor should operate and sun roof should open to a fully open position.
- Press and hold sun roof switch to SLIDE CLOSE position until sun roof motor stops. Sun roof motor should operate and sun roof should close to a halfway position.
- Press and hold sun roof switch to SLIDE CLOSE position until sun roof motor stops. Sun roof motor should operate and sun roof should close to a fully closed position.
- Press and hold sun roof switch to TILT UP position until sun roof motor stops. Sun roof motor should operate and sun roof should tilt up to a fully open position.
- Press and hold sun roof switch to TILT DOWN position until sun roof motor stops. Sun roof motor should operate and sun roof should tilt down to a fully closed position.
- After performing appropriate symptom test(s) and making repairs, repeat FUNCTIONAL TEST to ensure system is operational.