LEMON Manuals: Even more car manuals for everyone

Starter Relay Test

  1. Relay is located behind left kick panel attached to junction block 1. Remove relay. Using ohmmeter, check continuity between relay terminals No. 1 (White/Black wire) and No. 2 (Black Wire). Ensure continuity is present. If continuity is not present, replace relay.
  2. Check continuity between terminals No. 3 (Black wire) and No. 5 (White wire). Continuity should not be present. If continuity is present, replace relay.
  3. Operate relay by applying 12 volts to terminal No. 2 and grounding terminal No. 1. Check continuity between terminals No. 3 and 5. Ensure continuity is present. If continuity is not present, replace relay.