Clutch Assembly: Inspection
- Clean oil, grease, metal deposits, etc. from flywheel mating surfaces. DO NOT use air pressure to clean clutch parts. Inspect flywheel for cracks, heat marks, warpage or other damage. Replace or repair as necessary.
- Check wear on clutch disc's facing by measuring depth of each rivet head depression. See CLUTCH DISC SERVICE LIMITS . If depth has reached service limit at any rivet head or cracks in facing appear, replace clutch disc assembly. Maximum runout of clutch disc facing is .031" (.79 mm). Replace clutch disc if runout is not within specification.
- Check pressure plate for warpage, heat marks (blue coloration), cracks and diaphragm spring fingers for wear and uneven height. If pressure plate is excessively worn or damaged, replace pressure plate assembly. Check pilot bearing for smooth operation. If bearing does not spin freely, replace it.