LEMON Manuals: Even more car manuals for everyone

Throttle Position Sensor (TPS)

  1. Connect the diagnostic tool on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.

    Specification: Refer to "SPECIFICATION "

  3. Turn off the ignition switch and disconnect the diagnostic tool from the self-diagnosis connector (DLC).
  4. Disconnect the ETC module connector and measure the resistance between ETC module terminals 1 and 2.

    Specification: Refer to "SPECIFICATION "