LEMON Manuals: Even more car manuals for everyone

Removal And Installation

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the RCV control solenoid valve connector (A), RCV hoses (B).
  4. After installing bolt, remove the RCV control solenoid valve.

    Tightening torque: 

    9.8 - 11.7 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.6 lb-ft)

    G14753273Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.