LEMON Manuals: Even more car manuals for everyone

Removal And Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  1. Switch "OFF" the ignition and disconnect the battery negative (-) terminal.
  2. Remove the Front Bumper.

    (Refer to Body (Interior and Exterior) - "FRONT BUMPER ")

  3. Disconnect the connector (A) and then remove the ambient temperature sensor (B).
    G14753135Courtesy of HYUNDAI MOTOR AMERICA
  4. Install in the reverse order of removal.