LEMON Manuals: Even more car manuals for everyone

Removal And Installation

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the luggage side trim [RH].

    (Refer to Body (Interior and Exterior) - "LUGGAGE SIDE TRIM ")

  3. Disconnect the fuel pump control module connector (A).
    G14763985Courtesy of HYUNDAI MOTOR AMERICA
  4. After loosening the mounting nuts (A), then remove the fuel pump control module (B). Tightening torque:

    3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)

    G14763986Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.