LEMON Manuals: Even more car manuals for everyone

Timing Chain: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Set No. 1 cylinder to TDC. Turn the crankshaft damper pulley clockwise and align its groove with the timing mark "T" of the lower timing chain cover.
    G14752498Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the timing chain cover.

    (Refer to Timing System - "TIMING CHAIN COVER ")

  3. Make sure that the key (A) of crankshaft is aligned with the mounting surface of the lower crankcase in a straight line.

    Check that the No. 1 piston is positioned at the TDC.

    G14752499Courtesy of HYUNDAI MOTOR AMERICA
  4. Check that the timing marks of the intake camshaft sprocket and the exhaust camshaft sprocket are in line.
    G14752500Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • If timing marks are not in line, turn the crankshaft clockwise one revolution (360°). (Do not rotate engine counterclockwise.)
  5. Release the ratchet by pulling the link of timing chain tensioner down using a thin screwdriver. Compress the piston and then insert a stopper pin into the hole to fix the piston and then remove the tensioner (A).
    G14752501Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Be careful not to pop out the piston when removing the tensioner.
  6. Remove the timing chain tensioner arm (A).
    G14752502Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the timing chain cam to cam guide (A).
    G14752503Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the timing chain guide (A).
    G14752504Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the timing chain (A).
    G14752505Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the crankshaft chain sprocket (A) for the timing chain.
    G14752506Courtesy of HYUNDAI MOTOR AMERICA