LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Position the transmission fluid cooler pipe assembly in the vehicle for installation.
  2. GM4583247Courtesy of GENERAL MOTORS COMPANY

    Transmission Fluid Cooler Pipe (2) @ Transmission Fluid Cooler Pipe Connector (1) - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection 

  3. GM4583255Courtesy of GENERAL MOTORS COMPANY

    Transmission Fluid Cooler Pipe Clip (1) @ Engine Coolant Fan Shroud - Install

  4. GM4583259Courtesy of GENERAL MOTORS COMPANY

    Transmission Fluid Cooler Pipe (2) @ Transmission Fluid Cooler Pipe Connector (1) - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection 

  5. GM4583520Courtesy of GENERAL MOTORS COMPANY

    Transmission Fluid Cooler Inlet and Outlet Pipe (1) @ Transmission Fluid Cooler Pipe (2) - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection 

  6. GM4583257Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Transmission Fluid Cooler Pipe Bolt (1) - Install and tighten 9 N.m (80 lb in)

  7. Dual Horn - Install Dual Horn Replacement
  8. Remove the drain pan.
  9. Install both headlamps. Front Headlamp Replacement (Chevrolet) , or Front Headlamp Replacement (GMC)
  10. Fill and inspect the transmission fluid level. Transmission Fluid Level and Condition Check
  11. Inspect for transmission fluid leaks.