|
Preliminary Procedures
- Remove the rear side door trim. Refer to Rear Side Door Trim Replacement (Crew Cab)
, or Rear Side Door Trim Replacement (Extended Cab)
.
- Disconnect the electrical connector.
- Remove the rear side door water deflector.
- Remove the rear side door latch control. Refer to Rear Side Door Latch Control Replacement .
- Mark the upper latch location using a grease pencil for proper installation.
|
| 1 |
Rear Side Door Upper Latch Retainer (Qty: 3) Procedure
- Remove the tape from the door.
- Using the appropriate tool, remove the retainers from the door.
|
| 2 |
Rear Side Door Upper Latch Fastener (Qty: 3) Tighten 11 N.m (97 lb in) |
| 3 |
Rear Side Door Upper Latch Bracket Fastener Tighten 11 N.m (97 lb in) |
| 4 |
Rear Side Door Upper Latch Procedure Transfer all necessary components.
NOTE:
- The rear side door upper latch cable and the rear side door upper latch are replaced as one and should not be separated.
- Inspect the door latch for proper operation before installing the door trim.
|