Removal Procedure
WARNING:
Refer to Brake Dust Warning .
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
If equipped, reposition the wheel speed sensor electrical connector protective sleeve (1).
Disconnect the wheel speed sensor electrical connector (1) and release the retainer on the frame rail.
Release the front wheel speed sensor harness clips (1) from the vehicle frame.
Remove the front wheel speed sensor harness bracket bolt (1).
Thoroughly clean the wheel speed sensor mounting area of the steering knuckle of any dirt and debris.
- Remove the front wheel speed sensor bolt (1).
- Carefully remove the wheel speed sensor from the suspension knuckle by pulling straight outward.
NOTE:
Do not pry or lever against the wheel speed sensor to remove.