LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. GM4287535

    Electrical Connector (1) - Connect

  2. Install the starter. (2)
  3. GM4287534
    CAUTION:

    Refer to Fastener Caution

    Starter Mounting Bolt (1) - Install and tighten (Qty: 2) 58 N.m (43 lb ft)

  4. GM4286416

    Battery Positive Cable (2) - Install

  5. Starter Solenoid Cable Nut (1) - Install and tighten 12.5 N.m (111 lb in)
  6. Battery Positive Cable Conduit Fastener (3) - Install and tighten 9 N.m (80 lb in)
  7. GM4287567

    Knock Sensor- Bank 2 (1) - Install - Knock Sensor Replacement - Bank 2

  8. GM4286549

    Starter Heat Shield (2) - Install - Starter Shield Replacement (LGX) 

  9. Warm Up Three-Way Catalytic Converter - Bank 2 - Install - Warm Up Three-Way Catalytic Converter Replacement (Bank 2, LGX)
  10. Lower the vehicle.
  11. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection (Without KL9) Battery Negative Cable Disconnection and Connection (With KL9)