Installation Procedure
Electrical Connector (1) - Connect
- Starter (2) - Install
- CAUTION:
Refer to Fastener Caution
Starter Mounting Bolt (1) - Install and tighten (Qty: 2) 22 N.m (16 lb ft)
Battery Positive Cable (1) - Install
- Battery Positive Cable Nut (2) - Install and tighten 12.5 N.m (111 lb in)
Transfer Case Assembly (2) - Install - Power Transfer Unit Case Replacement
- Lower the vehicle.
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Without KL9) Battery Negative Cable Disconnection and Connection (With KL9)