Installation Procedure
Battery Negative Cable (2) - Install
- Battery Negative Cable Ground Fastener (1) - Install and tighten 22 N.m (16 lb ft)
- Retainer (3) - Engage (Qty: 4)
Battery Negative Cable (2) - Install
- Battery Negative Cable Frame Ground Fastener (1) - Install and tighten 9 N.m (80 lb in)
Electrical Connector (1) @ Battery Current Sensor (2) - Connect
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Without KL9)
Body Harness Terminal (2) - Install
- Body Harness Ground Fastener (1) @ Battery Negative Cable (3) - Install and tighten 9 N.m (80 lb in)
CAUTION:
Refer to Fastener Caution