LEMON Manuals: Even more car manuals for everyone

Rear Side Door Window Weatherstrip Replacement

Fig 1: Rear Side Door Window Weatherstrip
GM3743986Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedures 
Remove the rear side door window belt reveal molding. Refer to Rear Side Door Window Belt Reveal Molding Replacement .
1 Rear Side Door Inner Panel Access Hole Plug
Procedure 
Pull access hole plug off of door frame to aid in removal and installation of weatherstrip.
2 Rear Side Door Window Weatherstrip

Procedures

  1. Grasping both upper corners of the rear side door window weatherstrip, pull downward releasing the weatherstrip from the door frame.
  2. Pull the weatherstrip upward, releasing the weatherstrip from the front and rear channel.
  3. Insert the weatherstrip downward in the front and rear channel until fully seated.
  4. Position the window weatherstrip in both corners of the frame, working the weatherstrip around the frame.
  5. Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the channels.
NOTE:

Inspect the door window for proper operation before installing the door trim panel.