LEMON Manuals: Even more car manuals for everyone

Circuit/System Verification

  1. Ignition » On / Vehicle » In Service Mode
  2. Perform the scan tool control function:Driver Window Motor »Up & Down

    Verify the component works as specified:M74D Window Motor - Driver =Up & Down

    • If not the specified state 

      Test or replace the component: - M74D Window Motor - Driver

    • If the specified state 
  3. Operate the component:S79D Window Switch - Driver

    Verify the component works as specified:M74D Window Motor - Driver =Express Up & Express Down

    • If the specified state 
  4. NOTE:

    It may take up to 2 min for all vehicle systems to power down before an accurate ground or low reference circuit continuity test can be performed.

  5. Ignition/Vehicle & All vehicle systems » Off
  6. Ignition » On / Vehicle » In Service Mode
  7. Operate the component:S79D Window Switch - Driver

    Verify the component works as specified:M74D Window Motor - Driver =Express Up & Express Down

    • If not the specified state 

      Test or replace the component: M74D Window Motor - Driver.

    • If the specified state 
  8. All OK.