LEMON Manuals: Even more car manuals for everyone

Installation Procedure

    Fig 1: View Of Spark Plug And Sparkplug Seat
    GM14824Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The spark plug comes pre-gapped. Do not change the spark plug gap from 1.01 mm (0.040 in).

  1. Inspect the spark plug gap. Adjust the gap as needed. Refer to Ignition System Specifications .
  2. Hand start the spark plug in the corresponding cylinder.
  3. CAUTION:

    Refer to Fastener Caution .

  4. Tighten the spark plug.

    Tighten 

    Tighten the plug to 20 N.m (15 lb ft).

  5. Install the spark plug wire. Refer to Spark Plug Wire Replacement .