LEMON Manuals: Even more car manuals for everyone

Removal Procedure

IMPORTANT:

Clean the fuel feed line connection and surrounding area prior to disconnecting the fitting in order to avoid possible fuel system contamination.

    Fig 1: EVAP Line Clip And Retainer
    GM1704504Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Remove the fuel feed line from the retaining feature (2) in the fuel tank.
  3. Open the fuel/evaporative emission (EVAP) line clip (1) and remove the fuel feed line from the clip.
  4. Disconnect the fuel feed line quick connect fitting at the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service .
  5. Fig 2: Fuel Feed Line
    GM1704506Courtesy of GENERAL MOTORS CORP.
  6. Remove the fuel feed line from the fuel tank.
  7. Cap the fuel feed port on the fuel tank module in order to prevent possible fuel system contamination.