LEMON Manuals: Even more car manuals for everyone

Removal Procedure

CAUTION:

Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.

    Fig 1: Engine Wiring Harness Electrical Connector, Clip, Bolt And ECT Sensor
    GM1960215Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system to a level below the engine cooling temperature (ECT) sensor. Refer to Cooling System Draining and Filling (Static Fill) .
  2. Disconnect the engine wiring harness electrical connector (2) from the ECT sensor (1).
  3. Fig 2: Engine Coolant (ECT) Sensor
    GM855737Courtesy of GENERAL MOTORS CORP.
  4. Remove the ECT sensor.