LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Slide the BCM onto the bracket.
  2. Connect all the connectors (1) except the brown connector.
  3. Connect the brown connector.
  4. Fig 1: Connecting Body Control Module Connectors
    GM387553Courtesy of GENERAL MOTORS CORP.
  5. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  6. Fig 2: Installing Knee Bolster
    GM348714Courtesy of GENERAL MOTORS CORP.
  7. Connect the negative battery cable(s).
  8. Reprogram the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration .
  9. Perform the Passlock Learn Procedure. Refer to Programming Theft Deterrent System Components in Theft Deterrent