LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  2. Disconnect the throttle position (TP) sensor electrical connector (1).
  3. Fig 1: View Of TP Sensor, IAC Motor, ECT Sensor, Control Port Injector Module & Engine Harness Clip Bolt
    GM782174Courtesy of GENERAL MOTORS CORP.
  4. Remove the TP sensor screws.
  5. Fig 2: View Of TP Sensor Screws
    GM10935Courtesy of GENERAL MOTORS CORP.
    NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent, as damage may result.
  6. Remove the TP sensor.
  7. Fig 3: View Of TP Sensor
    GM10936Courtesy of GENERAL MOTORS CORP.